Assignment 10

Pada post kali ini, saya akan menjawab pertanyaan-pertanyaan Assignment #10 dari Chapter 10, dari buku "Concepts of Programming Languages" karya Robert W. Sebesta.

Review Questions

        1. What is the difference between an activation record and an activation record instance?
An activation record is the format, or layout, of the moncode part of a subprogram, whereas an activation record instance is a concrete example of an activation record, a collection of data in the form of an activation record.

        2. Why are the return address, dynamic link, and parameters placed in the bottom of the activation record?
Because the entried must appear first.

        3. What kind of machines often use registers to pass parameters?

In many compilers for RISC machines, parameters are passed in registers. This is because RISC machines normally have many more registers than CISC machines. In the remainder of this chapter, however, we assume that parameters are passed in the stack. It is straightforward to modify this approach for parameters being passed in registers.

        4. What are the two steps in locating a nonlocal variable in a static-scoped language with stack-dynamic local variables and nested subprograms?

The first step of the access process is to find the instance of the activation record in the stack in which the variable was allocated. The second part is to use the local_offset of the variable (within the activation record instance) to access it.

        

        5. Define static chain, static_depth, nesting_depth, and chain_offset.

• Static chain: Chain of static links that connects certain activation record instances
• Static depth: Integer associated with a static scope representing the scope’s nesting depth
• The chain offset or nesting depth of a non-local reference is the difference between the static depth of the reference and that of the scope where it is declared.

Problem Sets

        6. Although local variables in Java methods are dynamically allocated at the beginning of each activation, under what circumstances could the value of a local variable in a particular activation retain the value of the previous activation?

If the variable is declared as static. Static modifier is a modifier that makes a variable history – sensitive.

        7. It is stated in this chapter that when nonlocal variables are accessed in a dynamic-scoped language using the dynamic chain, variable names must be stored in the activation records with the values. If this were actually done, every nonlocal access would require a sequence of costly string comparisons on names. Design an alternative to these string comparisons that would be faster.
Using approach that uses an auxiliary data structure called a display. Or, to write variable names as integers. These integers act like an array. So when the activation happens, the comparisons will be faster.

        8. Pascal allows gotos with nonlocal targets. How could such statements be handled if static chains were used for nonlocal variable access? Hint: Consider the way the correct activation record instance of the static parent of a newly enacted procedure is found (see Section 10.4.2).

Based on the hint statement, the target of every goto in a program could be represented as an address and a nesting_depth, where the nesting_depth is the difference between the nesting level of the procedure that contains the goto and that of the procedure containing the target. Then, when a goto is executed, the static chain is followed by the number of links indicated in the nesting_depth of the goto target. The stack top pointer is reset to the top of the activation record at the end of the chain.

        9. The static-chain method could be expanded slightly by using two static links in each activation record instance where the second points to the static grandparent activation record instance. How would this approach affect the time required for subprogram linkage and nonlocal references?

Including two static links would reduce the access time to non locals that are defined in scopes two steps away to be equal to that for non locals that are one step away. Overall, because most nonlocal references are relatively close, this could significantly increase the execution efficiency of many programs.

        10. Design a skeletal program and a calling sequence that results in an activation record instance in which the static and dynamic links point to different activation-recorded instances in the run-time stack.
> *\\
\emph{Answer}:\\
procedure Main\_2 is\\
\verb+ + X : Integer;\\
\verb+ +procedure Bigsub is\\
\verb+ +\verb+ + A, B, C : Integer;\\
\verb+ +\verb+ + procedure Sub1 is\\
\verb+ +\verb+ +\verb+ + A, D : Integer;\\
\verb+ +\verb+ +\verb+ + begin -- of Sub1\\
\verb+ +\verb+ +\verb+ + A := B + C; $\longleftarrow$ 1\\
\verb+ +\verb+ +\verb+ + ...\\
\verb+ + end; -- of Sub1\\
\verb+ + procedure Sub2(X : Integer) is\\
\verb+ +\verb+ + B, E : Integer;\\
\verb+ +\verb+ + procedure Sub3 is\\
\verb+ +\verb+ +\verb+ + C, E : Integer;\\
\verb+ +\verb+ +\verb+ + begin -- of Sub3\\
\verb+ +\verb+ +\verb+ + ...\\
\verb+ +\verb+ +\verb+ + Sub1;\\
\verb+ +\verb+ +\verb+ + ...\\
\verb+ +\verb+ +\verb+ + E := B + A; $\longleftarrow$ 2\\
\verb+ +\verb+ + end; -- of Sub3\\
\verb+ +\verb+ + begin -- of Sub2\\
\verb+ +\verb+ + ...\\
\verb+ +\verb+ + Sub3;\\
\verb+ +\verb+ + ...\\
\verb+ +\verb+ + A := D + E; $\longleftarrow$ 3\\
\verb+ + end; -- of Sub2\\
\verb+ + begin -- of Bigsub\\
\verb+ +\verb+ + ...\\
\verb+ +\verb+ + Sub2(7);\\
\verb+ +\verb+ + ...\\
\verb+ + end; -- of Bigsub\\
begin -- of Main\_2\\
\verb+ + ...\\
\verb+ + Bigsub;\\
\verb+ + ...\\
end; -- of Main\_2\\
\\
The sequence of procedure calls is:\\
Main\_2 calls Bigsub\\
Bigsub calls Sub2\\
Sub2 calls Sub3\\
Sub3 calls Sub1\\
\\
The activation records with static and dynamic links is as follows:\\
\begin{figure}
\centering
\includegraphics[scale=0.5]{ari}
\end{figure}


At position 1 in procedure Sub1, the reference is to the local variable,
A, not to the nonlocal variable A from Bigsub. This reference to A has the
chain\_offset/local\_offset pair (0, 3). The reference to B is to the nonlocal B
from Bigsub. It can be represented by the pair (1, 4). The local\_offset is 4,
because a 3 offset would be the first local variable (Bigsub has no parameters). Notice that if the dynamic link were used to do a simple search for
an activation record instance with a declaration for the variable B, it would
find the variable B declared in Sub2, which would be incorrect. If the (1, 4)
pair were used with the dynamic chain, the variable E from Sub3 would be
used. The static link, however, points to the activation record for Bigsub,
which has the correct version of B . The variable B in Sub2 is not in the
referencing environment at this point and is (correctly) not accessible. The
reference to C at point 1 is to the C defined in Bigsub, which is represented
by the pair (1, 5).\\
\\


\noindent